VTC 7240 (EOL)

CPU

Intel® Core™ processor dual-core i7-5650U, 2.2GHz

Memory

2 channel 204-pin DDR3L SO-DMIM socket support 1333/1666MHz up to 16GB, default Industrial grade 2GB

Storage

2 x 2.5" SATA 3.0 SSD/HDD (removable & hot swappable), RAID 0,1 supported (optional lockable storage available)

1 x CFast (externally accessible)

Expansion

1 x Full size mini-PCIe socket (USB 2.0)

1 x Full size mini-PCIe socket (USB 2.0 + PCIe)

1 x Full size mini-PCIe socket (USB 2.0 + PCIe)

1 x Half size mini-PCIe socket (USB 2.0 + PCIe)

Function

1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou) or optional module with Dead ReckoningBuilt-in G-sensor

I/O Interface-Front

4 x LED for power, storage, WWAN, WLAN

2 x 2.5" SATA 3.0 SSD/HDD (removable & hot swappable), RAID 0,1 supported (optional lockable storage available)

1 x Dual USB type A connector for USB 3.0 port + USB 2.0 port

2 x Externally accessible SIM card socket (selectable)

1 x Phone jack 3.5mm for 1 x Mic-In

1 x Phone jack 3.5mm for 1 x Line-out

1 x Externally accessible CFast card socket with cover

1 x Event button (trigger type)

1 x Reset button

3 x Antenna hole for WWAN/WLAN/BT

I/O Interface-Rear

1 x 9 ~ 36VDC input with ignition and 35W typical power consumption

1 x Dual USB type A connector for USB 3.0 port + USB 2.0 port

2 x RJ45 10/100/1000 Fast Ethernet with LED

1 x Phone jack 3.5mm for 1 x Mic-in

1 x Phone jack 3.5mm for 1 x Line-out with 1.5W output each

1 x DB-15 VGA. Resolution up to 2560 x 1600 @60Hz

1 x DP port. Resolution up to 2560 x 1600 @60Hz2 x DB-9 RS-232

1 x DB-9 RS-232/422/485 (RI/12V selectable)

1 x DB-9 for CAN 2.0B (optional CAN Bus 2.0B mini-PCIe card), 2 x MCU-DI and 2 x MCU-DO

1 x 16-pin terminal block
- 1 x CAN Bus 2.0B (on board)
- 1 x optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939)
- 8 x Programmable GPIO
(Digital Input)
Input voltage (internal type): 5VDC TTL (default)
Input voltage (source type): 3 ~ 12VDC
(Digital Output)
Digital output (sink type): 5VDC TTL (default), max current: 20mA
Digital output (source type): 3 ~ 24VDC, max current: 150mA

1 x 12VDC output (2A), SM Bus

4 x antenna hole for WWAN/WLAN/BT/GPS

1 x Fuse (15A)

Power Management

Selectable boot-up & shut-down voltage for low power protection by software

Setting 8-level power on/off delay time by software

Status of ignition and low voltage can be detected by software

Support S3/S4 suspend mode

Operating System

Windows 10

Windows 8, WES8

Windows 7, WES7

Linux (kernel 4.X)

Dimensions

260mm (W) x 206mm (D) x 79.5mm (H) (10.24" x 8.11" x 3.13")

Weight: 2.5kg

Environment

Operating temperatures:
-30°C to 55°C (w/ industrial SSD) with airflow
-20°C to 45°C (w/ commercial HDD) with airflow

Storage temperatures: -35°C to 85°CRelative humidity: 10% to 90% (non-condensing)

Vibration (random): 1.5g@5 ~ 500 Hz (in operation, HDD), 2g@5 ~ 500 Hz (in operation, SSD)

Vibration (SSD/HDD):
Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test

Shock (SSD/HDD):
Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g

CE approval

FCC Class A

E13 Mark