VTC 7270

12/13th Gen Intel® Core™ i, Intel® R680E chipset

Graphics:
- Intel® UHD Graphics 770, 1.55GHz
- Max resolution: 4096 x 2160@60Hz (HDMI)
- DirectX: 12, OpenGL: 4.5

2 x SO-DIMM, DDR5-4800MHz

ECC & dual-channel support

2 x 2.5” SSD (15mm height, removable)

1 x M.2 2280 Key M (PCIe4.0 x4), NVMe SSD in default, Hailo AI card (optional)

1 x mPCIe slot (PCIe 3.0, SATA 3.0, USB 2.0), Wi-Fi (default), optional for mSATA

1 x mPCIe slot (USB 3.2, PCIe 3.0, SATA 3.0), SIMs support, LTE modem (default), optional for Wi-Fi/m

SATA by DIP S/W setting

1 x M.2 3042/50/52 Key B socket (USB 3.2/2.0), SIMs support for LTE/5G modem

1 x M.2 3030 Key E socket (PCIe 3.0 x 2 & USB 2.0), Wi-Fi (default), Hailo AI card in option

1 x HDMI 2.0a/b, up to 3840 x 2160@60Hz

1 x VGA, up to 1920 x 1200@60Hz; 1 x DP, 4096x2304@60Hz

2-port independent 2.5GbE, RJ45 connector
- 9Kbyte Jumbo frame
- PTP (IEEE 1588) support
- Controller: Intel® I226-IT

Additional 4-port 2.5GbE PoE+, PSE 60W in max (options)

6 x USB 3.2 Gen 2:
- Host Type-A connector
- 5V@900mA each
- Up to 10Gbit/s link speed & compliance with USB 2.0 (LS/FS/HS link speed)

2 x Full RS232/422/485

2 x Full RS232RS232 working voltage, +- 9V, baud rate up to 115.2kb/s

2-wire/4-wire RS-485 (Baud rate: 300~115.2Kbps)

Line-out, unbalance stereo, left & right channel

Line-in & MIC-in, stereo

DC-OUT: 12VDC@2A

4-bit input
- Source: 9~36VDC (12V@1.1mA/24V@2.2mA)
- External: 0~33VDC pull-high, high-level, 3.3 - 33 VDC; low-level, 0 - 2 VDC4-bit output
- Source: 9~36VDC (nominal 35mA@24V)
- External: 5~27VDC pull-high, sink current w/ 220mA for each bit, 500mA max (@25C)

Source or external can be selected by DIP S/W (default: source type)

2 x CAN FD, compatible with CAN2.0A/2.0B

Up to 5Mb/s in data transmit

IEC 61000-4-2 Electrostatic Discharge (ESD): ± 4KV/8KV (contact/air)

u-blox NEO-M9N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou

Optional DR (Dead Reckoning) function, NEO-M9V/M8L

Nominal voltage: 9~36V

Cranking voltage: 6V~9V (less than 20 sec)

OCP & UVP (shut down once exceeding 37V)

The ignition on/off control & programmable on/off delay timer

Optional for remote power on/off control

ATX power & reset button

9 x LED Indicators

4 x Nano SIM slots (SIM1-1, SIM1-2, SIM2-1, SIM2-2)

2 x USB3.2 Type A

1 x HDMI, 1 x DPFan power connector

4 x 2.5GbE (RJ45), 1 x GbE (RJ45)

2 x Removable 2.5” SSD bay

1 x Multi-port DB15 (4 x DI, 4 x DO, 2 x CAN FD)

1 x PR-SMA for GNSS, 2/4 x SMA for LTE/5G ant.

2 x RS232 (DB9), 2 x RS232/422/485 (DB9)

4 x USB 3.2 type A

Audio jack for Line-in, Line-out, MIC-in

1 x VGA

1 x Mini-fit connector (DR signal & DC-OUT)

5-pin Phoenix for 9~36VDC-in

2/4 x PR-SMA for Wi-Fi ant.

260.0mm x 210.0mm x 81.0mm (w/o mount bracket)

293.0mm x 210mm x 90.0mm (w/ mount bracket)

5.7kg, 6.8kg (w/ fan kit)

Operating temperatures: -40°C~70°C (35W CPU, fanless)

Operating temperatures: -40°C~70°C (65W CPU, w/ fan)

Storage temperatures: -40°C~85°C

Relative humidity: 10%~95% (non-condensing)

Vibration in operating:
- MIL-STD-810H, 514.8C Procedure 6, Category 4
- IEC 60068-2-64: 2.0g@5~500 Hz

Vibration in storage:
- MIL-STD-810H, 514.8E Procedure 1, Category 24, 7.7g

Shock:
- MIL-STD-810H, 516.8 Procedure I, trucks and semi-trailers=40g
- Crash hazard: Procedure V, ground equipment=75g

Windows 10 64-bit/ Windows 10 IOT 64-bit, Windows 11

Linux (Ubuntu 18.04)