VTC 7251-IMIoT

CPU

Intel® Core™ 8th Gen. i7-8700T, up to 4 GHz, 35W, 6 Core

Compatible Intel® Core™ 9th Gen. (Coffee Lake Refresh)

Chipset

Intel® Q370 platform controller hub

Myriad-X mPCIe Deep Learning Accelerator Module

1 or 2 Myriad X MA2485 VPU

Per VPU with
- Up to 1 TOPS
- 16 programmable 128-bit VLIW vector processors
- CPUs 2 x LEON 4 cores (RISC; SPARC V8)
- On-chip accelerators 20+ image/vision processing accelerator Neural compute engine (DNN accelerator)
- Neural network capability neural compute engine

Operating voltage: 3.3V +/- 10 %

Dimensions: 51mm x 30mm x 2.5 mm

Memory

2-Channel 204-pin DDR4 SO-DMIM sockets up to 32GB/channel (64GB for two channels, non-ECC up to 2666 MHz), default 4GB + 4GB industrial grade memory

Video Output

Chipset Intel® UHD Graphics 630

1 x HDMI 1.4b up to 4096 x 2160 @ 30Hz

1 x VGA up to 1920 x 1200 @ 60Hz

Storage

2 x 2.5” SATA 3.0 external SSD (compatible with 15mm height), RAID 0/1 supported

2 x mSTAT 3.0 (BIOS selection)

Expansion

1 x Full size mini-PCIe socket (USB 2.0, PCIe 3.0 & SATA 3.0 (BIOS selection))

1 x Full size mini-PCIe socket (USB 2.0, PCIe 3.0 & SATA 3.0 (BIOS selection))

1 x Full size mini-PCIe socket (USB 2.0), optional M.2 key B (USB 2.0, USB 3.0)

1 x Full size mini-PCIe socket (USB 2.0), optional M.2 key B (USB 2.0, USB 3.0)

1 x M.2 key B (USB 2.0, USB 3.0)

GNSS and On Board Sensor

1 x Default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou

Optional modules with dead reckoning available

TPM 2.0 by Infineon SLB9665TT2 (BOM option)

G Sensor (3-axis, 10-bit resolution)

Power over Ethernet

4 x Independent LAN, 10/100/1000 Mbps I210-IT GbE, PoE 802.3af/at, max. 60W

1 x LAN, 10/100/1000 Mbps I219 support iAMT and WOL

I/O Interface-Front

20 x LED indicators (including 4 x programmable LED)

4 x USB 3.1 type A (5V/1A)

6 x Externally accessible SIM card sockets (4 x WWAN + 8 x SIM, BOM option)

1 x Reset button

1 x Power button with LED

2 x 2.5” external SSD

11 x SMA antenna hole (GPS/WWAN/WLAN)

I/O Interface-Rear

4 x RJ45 PoE 802.3af/at, max. 60W

1 x RJ45 LAN port, 10/100/1000 Mbps

1 x 3-pin terminal block for 9V~36VDC

1 x Connector (4 x 2) for 12VDC/2A output, power button, 2 x MDI

1 x Mic-in, 2 x Line-out

2 x DB9 for full RS232

1 x DB9 for full RS232/422/485 (RI, 5V/0.5A, 12V/0.5A)

1 x DB15
- 1 x Isolated CANBus 2.0B
- 1 x GPS DR (option)
- 4 x DI and 4 x DO2 x USB 3.1 type A (5V/1A)1 x HDMI 1.4b1 x VGA

Power Management & Software Support

Power input 9~36VDC

Cranking voltage: 6V~9V (< 30 seconds)

Reverse protection, OCP & UVP

Selectable boot-up & shut-down voltage for low power protection by software

Setting 8-level power on/off delay time by software

10~255 seconds WDT support, setup by software

SDK (Windows/Linux) including utility and sample code

Operating System

Windows 10

Linux

Dimensions

260 x 256 x 83.5 (W x D x H) (mm)

Weight

4.2kg

Environment

Operating temperatures
- -30°C~60°C (w/ industrial SSD) with air flow

Storage temperatures: -40°C~80°C

Relative humidity: 90% (non-condensing)

Vibration (random)
- 2g@5~500 Hz (in operation, SSD)Vibration (SSD)
- Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
- Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity testShock (SSD)
- Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=40g
- Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g

Certifications

CE approval

FCC Class A

E13 mark